IFAM, INTRONIKA and ROBOTICS 2025 (Thank you all)

We would like to thank all our many customers and visitors who attended the “IFAM INTRONIKA ROBOTICS 2025” trade fair in Ljubljana showing great interest in our products.

This year we held the Slovenian Premiere of MHO5000 Series oscilloscope, the first  Rigol’s oscilloscope with more than 4 channels. These are 12-bit oscilloscopes with 4, 6 or 8 analog channels and 16 digital channels with 4 Gsa/s and 1M wfms/s. User can choose between 500MHz or 1GHz bandwith models..

Great interest was sparked by the portable battery-powerable instrumentation: the 5½ didit digital multimeter DM858; the 12-bit mixed-signal oscilloscope DHO924S with built-in AWG generator and included protocol decoding & triggering for a range of serial buses; and the 16-bit arbitrary waveform generator DG922 Pro.
All of them feature the same compact and portable form factor, a large 7-inch capacitive touch-screen display, and the USB Type-C power connector that allows them to be powered by a standard PD power-bank which also make them perfect for (lower budget) industrial maintenance and diagnosis, both on the shop floor and in the field.

In addition to the Slovenian premiere we also exhibited a number of other Rohde & Schwarz instruments such as the outstanding MXO4 and MXO5 (12/18-bit, that actually holds several world-records and a unique mixed-domain real-time multipoint zone-trigger), the RTH (portable 10-bit, with galvanically isolated inputs) and the new RTB2 digital mixed-signal oscilloscopes.
The R&S exibition of Essential_products was completed the EPL1000 (the new single-shot time-domain-scan EMI test receiver for compliance and precompliance measurements and certifications with builtin report generator and in line with IEC, EN, CISPR and FCC regulations.), the ZNLE (vector network analyzer), the FPC-COM2 (a full optional FPC1500 spectrum analyzer), the NGC102 (a 3 channel programmable DC power supply) and a few current probes RT-ZC02 and RT-ZC03.
For the RTH we also sohwcased our MDA (Motor Drive  Analyzer) application dedicated to automated measurement and diagnostics of inverters and motors, currently in RC stage.

From GW-Instek we had the top-selling multi-channel GPP-3323L DC power supply with integrated CC|CV|CR electronic load functions, the handheld LCR meter LCR-916, the IEC61010-2-034 compliant 5 in 1 electrical safety analyzer GPT-12004, and the single-phase 16-bit and up to 100KHz digital power meter GPM-8310 with harmonic measurement and analysis. The GPM-8310 was measuring the consumption of all instrumentation in the booth.

From Testo, we presented the 883 thermal imaging camera, particularly suitable for industrial maintenance and photovoltaic inspections along with the 770-2 current clamp and the 605i thermo-hygrometer.
The 770-2 current clamp is an AC/DC CAT IV with measurement range from 0-400uA to 600A and power measurement functions (with power factor calculation, active reactive and apparent power) and inrush current detection that thanks to its bluetooth connection allows to accomplish measurements from safety area.

Rigol‘s shwocased instrumentation was completed with the DAQ system M300 for which we showcased also our drivers for its use with Simatic S7 PLCs (S7-300/400/1500), the 6½ digital multimeter DM3068 and the RPA246 deskew fixture and a set of NFP-3 near field probes.

STUDENTS AND TEACHERS PROMOTION

Since it all starts from here, at IFAM2023 which gave us the inspiration, we naturally continued to promote our initiative in dedicated to students and professors for their home laboratories.

Working with all of you on an almost daily basis always makes our work enjoyable.

Thank you all